Your fleet running reports

[Swervin_Mervin]

An F20 1-Series is longer, wider, taller and (a lot - 350kg) heavier than an E30 3-Series. That's progress for ya !

https://www.carsized.com/en/cars/compar ... its=metric

It's damned near the size of - 15cm shorter than, and 20kg heavier than - an E46 saloon.

https://www.carsized.com/en/cars/compar ... its=metric

Convertible is a fair bit heavier, but for clarity, both these cars are on 18" wheels. One just doesn't look like it.

2BMWs-Redux-33-24.jpg

Only 20cm shorter than an E90 saloon. Which itself is now nearly 20cm shorter than a current gen 3 series

[integrale_evo]

Crikey. I always think the e30 is quite a long car for its time, surprised a 1er is longer. From memory, dimensionally the e36 is very similar to the e30 ( Will have to check it now!)

[Matty]

UP GTi - paid £1.20 for new screws for the number plate to replace the rusty old ones. I'm far more chuffed than I should be about this, and surprised at how much difference it's made.

Empty Driveway Space - deposit paid on a new car, collection next weekend. Only taken me 12 months of hassling the owner of a specific car to get him to sell it, as it's a 1/1 in colour/spec and pretty much exactly how I'd spec that car if I bought it new. Problem is the garage hasn't been used since the 4C, so not sure where to put everything....

[John]

Interesting…more clues needed

[V8Granite]

Evora.

Dave!

[Mito Man]

That 2 door Lexus V8 thing

[Matty]

Interesting…more clues needed

OK - they were white and yellow, bought in packs of 4.

[John]

Badumtish

So, the car

[Jobbo]

Well done on the numberplate screws, except isn’t the correct way to get new plates and mount them with sticky pads to avoid all screws?

Look forward to the new car reveal Matt. I have no idea what it might be but I’m very pleased it’s a 1 of 1. All my cars are 1 of 1 if you consider the VIN and registration.

[V8Granite]

That 2 door Lexus V8 thing

Ooh in all black or that cool red they have.

Dave!

[speedingfine]

Trigger pulling info pronto please Matty There are literally no clues so what chance do we have?

[Jobbo]

I doubt there are any unique spec LC500s - the only thing you could choose was the colour surely? And Matt has been after this specific car for a year. So I’m thinking it’s a Lotus.

[Marv]

Well done on the numberplate screws, except isn’t the correct way to get new plates and mount them with sticky pads to avoid all screws?

Look forward to the new car reveal Matt. I have no idea what it might be but I’m very pleased it’s a 1 of 1. All my cars are 1 of 1 if you consider the VIN and registration.

When I took off the natty fake carbon fibre number plates off the CSL which the previous owner fitted, I used some heavy duty 3M dual lock (Velcro, but not Velcro), this stuff.

I don't take off the plates off often enough to justify it... but I can attest that it's decent, strong stuff!

My incorrect guess for Matty is a Caterham 7.

[Jobbo]

I’ve used actual Velcro for years - the 3M Velcro tape has brilliantly sticky and weather resistant glue. And it makes repositioning the plate if you get it wonky very easy.

[John]

As we are talking about registration plates

I've changed my front plate for a legal smaller one. Basically you lose the unused excess around the edges but leave the size of the letters/numbers alone and as I have a number one the space next to that can be reduced slightly





Much better IMO now that the edges of the plate aren't outside the nose cone

[Matty]

Well done on the numberplate screws, except isn’t the correct way to get new plates and mount them with sticky pads to avoid all screws?

The screw holes were already there, so it was just easier. Using sticky stuff just gets messy, and as I don't have the need to rapidly swap numberplates...... yet.

Trigger pulling info pronto please Matty There are literally no clues so what chance do we have?

I'll post all the deets next week, but it is an Evora as guessed above. I'd been looked at Emiras (but now getting too expensive) and A110's (perfect on paper, but still lacking that little something that *really* makes me want one) so I stuck with plan A.

I do love an LC500 but they're too big.

[Matty]

As we are talking about registration plates

I've changed my front plate for a legal smaller one. Basically you lose the unused excess around the edges but leave the size of the letters/numbers alone and as I have a number one the space next to that can be reduced slightly

That's a massive improvement.

[mik]

As we are talking about registration plates

I've changed my front plate for a legal smaller one. Basically you lose the unused excess around the edges but leave the size of the letters/numbers alone and as I have a number one the space next to that can be reduced slightly

That's a massive improvement.

That. From memory it’s 11mm beyond the letters only.

[Jobbo]

Not wishing to be rude to John but he’s already shown us his private plate which has fewer characters. I do think a cut-down plate looks better when you have a shorter registration.

[Sundayjumper]

...as I have a number one the space next to that can be reduced slightly

Not true; the space between characters is 11mm and between groups (the "MY71" & "CON") is 33mm. Being a 1 doesn't change that.

Everything you need to know about number plates:

https://assets.publishing.service.gov.u ... plates.pdf

I fully agree with the smaller plate though I run non-legal ones on some of mine @ appx. 75% of legal size and <touch wood> have never had any issues. Just temporarily stick a legal one over the top at MOT time.

This one is the same colour too

IMG_7952.jpeg (134.86 KiB) Viewed 44 times