Had an absolutely crap day. Wanted to change the rear attachment on the tractor from lawn mower collector to chipper. Usually a 5 minute job but one of the pins had rusted solid on the 3 point hitch. Fuck me. Used a hammer, fire, clamp, sledge hammer, bent 2 pry bars into bananas, used a 3 tonne digger one end and winch on the other. Fucker didn’t budge at all
Then tried to get smart and fashion something like a flywheel puller but that was also a waste of time.
This only left me with 2 options, A) cut the 3 point hitch or B) cut the pin on the mower collector implement.
A is the smart thing to do as usually it’s easy to get a replacement arm, and the ball joint is already pretty fucked so needs changing anyway but the agricultural parts shortage is about 5 times worse than what’s happening with cars right now. Go to the dealer and they can’t even give me a date, they don’t even have spare pins or the right grade of hydraulic oil ffs
Guess I’m butchering the collector. It’s redundant anyway and it can always be welded back I suppose. Cut the pin off and start removing it from the tractor side only to find that pin is also rusted in place. Fortunately it is a replaceable pin and I can fashion one out of a threaded bolt so cut that fecker out too and I can finally start the arduous task of drilling the main pin out.

3 broken drill bits later and it’s finally out …
12 hours that took me. Just need to drive 30 miles tomorrow to get some hydraulic oil for the chipper…