I’ve gone for an AA branded one that plugs into the OBD port because the cig lighter would need rewiring to stay live with the ignition switched off. £20 off Amazon.Orange Cola wrote: ↑Sat Sep 21, 2019 10:01 pmI’d be interested to know what you go for and if it’ll work through the 12v socket with the panel left in the windscreen. The Mustang doesn’t get used every day and over the winter it will go out even less, something convenient like a solar charger I can leave in the window would be great!
eBay 996 build thread
- NotoriousREV
- Posts: 6437
- Joined: Wed Apr 11, 2018 4:14 pm
Re: eBay 996 build thread
Middle-aged Dirtbag
- NotoriousREV
- Posts: 6437
- Joined: Wed Apr 11, 2018 4:14 pm
Re: eBay 996 build thread
Boring stuff done on the Porsche:
New Bosch Aerotwin wipers
New nearside headlight bulb. The headlight mechanism is awesome: turn bolt to release headlight, whole unit slides out, change bulb, slide back in, lock mechanism and done. Took longer to get the bulb out of the packet than it did to change it
New Bosch Aerotwin wipers
New nearside headlight bulb. The headlight mechanism is awesome: turn bolt to release headlight, whole unit slides out, change bulb, slide back in, lock mechanism and done. Took longer to get the bulb out of the packet than it did to change it
Middle-aged Dirtbag
- DeskJockey
- Posts: 4828
- Joined: Thu Apr 12, 2018 8:58 am
Re: eBay 996 build thread
Can't beat a system designed with ease of maintenance in mind.
---
Driving a Galaxy far far away
Driving a Galaxy far far away
Re: eBay 996 build thread
Its a good system isn't it. There's also a toggle on the back of the lights to allow you to flick it from RHD to LHD if you take it on a road trip. Something to do on the boring Chunnel crossingNotoriousREV wrote: ↑Mon Sep 30, 2019 10:44 am Boring stuff done on the Porsche:
New Bosch Aerotwin wipers
New nearside headlight bulb. The headlight mechanism is awesome: turn bolt to release headlight, whole unit slides out, change bulb, slide back in, lock mechanism and done. Took longer to get the bulb out of the packet than it did to change it
Re: eBay 996 build thread
Nice.
Loved the headlights on the Disco 3/4 for similar pop in/out design. Sliders sometimes need encouragement with pliers, but otherwise this guy makes it look more fiddly than it is....
Loved the headlights on the Disco 3/4 for similar pop in/out design. Sliders sometimes need encouragement with pliers, but otherwise this guy makes it look more fiddly than it is....
Re: eBay 996 build thread
The easiest way to change a bulb on the R26 was to remove the front bumper and then remove the headlight. the other option was to jack it up remove the wheel then fumble through the wheel arch scratching several layers off your skin.NotoriousREV wrote: ↑Mon Sep 30, 2019 10:44 am Boring stuff done on the Porsche:
New Bosch Aerotwin wipers
New nearside headlight bulb. The headlight mechanism is awesome: turn bolt to release headlight, whole unit slides out, change bulb, slide back in, lock mechanism and done. Took longer to get the bulb out of the packet than it did to change it
the easiest ones ive seen were on my Edition 30. remove cover from the back of the light. Screw out bulb holder. Pull bulb out of connector.
- Jimmy Choo
- Posts: 2027
- Joined: Thu Apr 12, 2018 7:43 am
Re: eBay 996 build thread
The easiest way to change a bulb on the clio is to scrap the car.
Banal Vapid Platitudes
Re: eBay 996 build thread
The Mk3 Mondeo and Mk1 Ford Kuga had an awesome system. The headlight unit was held in by two large metal prongs' that you just pulled out with your fingers, then the whole headlight slides out. Easiest headlight bulbs I've ever changed.
The artist formerly known as _Who_
-
- Posts: 2545
- Joined: Wed Apr 11, 2018 3:58 pm
- Currently Driving: Ferrari F430 Spider
BMW M4 Comp
Mini Cooper
LR Evoque P300e - Contact:
Re: eBay 996 build thread
The Ferrari has a plate bolted into the front wheel arch, remove this and then grab a young child, dislocate his or her fingers, put superglue on said fingers, wait until superglue sets whilst they have a death grip on rear of bulb mount, twist and then change bulb, push back in and wait for enough skin to detach from child’s fingers so you can re-fit the plate without an awful squealing noise whilst driving..
Rear ones are even worse and usually involves breaking the light’s mount...
Rear ones are even worse and usually involves breaking the light’s mount...
Cheers,
Ian
Ian
- Swervin_Mervin
- Posts: 4794
- Joined: Wed Apr 11, 2018 8:58 pm
Re: eBay 996 build thread
The BM has an access hatch in the wheelarch liner. I tried using it once, and never again. It's not too difficult to pop the rear light cover off, unplug bulb, push the metal spring clip to one side and remove.
Hardest bit is getting the metal spring clip back in.
Hardest bit is getting the metal spring clip back in.
Re: eBay 996 build thread
Puma was only slightly more complicated - undo a couple of Torx head bolts, then twist a knob and boop, headlamp pops out as an entire unit.
Bulb change - assuming you have a torx bit to hand - was doable in about 2 mins, both sides.
Useful when it's pissing down and a bulb has popped on the A1M
E46 seems needlessly complicated - most of the bolts are accessible, with the exception of one that lives about ten inches down behind the slam panel, needing an extension bar to reach. I got to that stage, couldn't find an extension bar (think my bro has borrowed it) and just gave up.
(not a blown bulb, just a bit misty internally)
Re: eBay 996 build thread
Bulbs on the RS4 is a bumper-off job. Shocking design.
-
- Posts: 2545
- Joined: Wed Apr 11, 2018 3:58 pm
- Currently Driving: Ferrari F430 Spider
BMW M4 Comp
Mini Cooper
LR Evoque P300e - Contact:
Re: eBay 996 build thread
I think, at this stage, you should just move in with your brother as he seems to have most of your shit anyway!Beany wrote: ↑Mon Sep 30, 2019 2:40 pmPuma was only slightly more complicated - undo a couple of Torx head bolts, then twist a knob and boop, headlamp pops out as an entire unit.
Bulb change - assuming you have a torx bit to hand - was doable in about 2 mins, both sides.
Useful when it's pissing down and a bulb has popped on the A1M
E46 seems needlessly complicated - most of the bolts are accessible, with the exception of one that lives about ten inches down behind the slam panel, needing an extension bar to reach. I got to that stage, couldn't find an extension bar (think my bro has borrowed it) and just gave up.
(not a blown bulb, just a bit misty internally)
Cheers,
Ian
Ian
Re: eBay 996 build thread
Oh, forgot the C4, which is doable without removing the headlights/front end, but good christ your hands will regret it.
Blind installation with extremely strong retention clips + not enough space for gloves = badly scraped hands and bloody knuckles.
Passenger side was the worst IIRC.
Ian - yeah, I really need to get him to come over with the jack and a few of his tools. He works in the trade so he doesn't scrimp when it comes to buying decent, pro-grade stuff.
Need to make a list of things to do first though!
Blind installation with extremely strong retention clips + not enough space for gloves = badly scraped hands and bloody knuckles.
Passenger side was the worst IIRC.
Ian - yeah, I really need to get him to come over with the jack and a few of his tools. He works in the trade so he doesn't scrimp when it comes to buying decent, pro-grade stuff.
Need to make a list of things to do first though!
- Jimmy Choo
- Posts: 2027
- Joined: Thu Apr 12, 2018 7:43 am
Re: eBay 996 build thread
Alfa Romeo require a blood sacrifice to change a bulb.
Banal Vapid Platitudes
Re: eBay 996 build thread
The Smart car is a bumper off job too at this point I can remove it in about 2 minutes, and keep the relevant torx screwdrivers in the car.
- Orange Cola
- Posts: 2232
- Joined: Wed Apr 11, 2018 7:56 pm
Re: eBay 996 build thread
My Fiesta ST’s were a pain, they came with candles from the factory so it was a must to swap the bulbs. Front headlamps ‘clipped’ into place, it felt like you had to put enough force into them to break the clip to remove and refit the lamps. If you caught it wrong and didn’t immediately stop pulling once the clip released then you’d crack the bumper because Ford designed a lip to sit around the headlamp unit
The rears were awful too, you have to pull out the boot carpet and unscrew a hard plastic thumb screw, blind, which had been put on by machine so Popeyes forearms were required. Dropping the hard plastic thumb screw meant it fell in between the two skins of the body shell and gave you a permanent rattle from the back of the car and it would cost you a whole new unit at £300 to replace the screw (it would flap around on the harness without the screw in place).
The rears were awful too, you have to pull out the boot carpet and unscrew a hard plastic thumb screw, blind, which had been put on by machine so Popeyes forearms were required. Dropping the hard plastic thumb screw meant it fell in between the two skins of the body shell and gave you a permanent rattle from the back of the car and it would cost you a whole new unit at £300 to replace the screw (it would flap around on the harness without the screw in place).
Mustang GT 5.0 V8 -- Jaguar F-Pace
- NotoriousREV
- Posts: 6437
- Joined: Wed Apr 11, 2018 4:14 pm
Re: eBay 996 build thread
Got a couple of warning lights today. Driving my youngest to football the ABS and PSM Off warning lights popped on about halfway there, after about 15 miles of driving. On the way back, they’d gone off when I restarted, only to pop back on, again after about 15 miles of driving.
I checked my tyre pressures to see if a soft tyre was confusing the sensors but they were all fine, so it’s probably a wheel sensor gone dodgy, but it’s also possible it’s a MAF issue. I need to do a code read to find out for sure.
I checked my tyre pressures to see if a soft tyre was confusing the sensors but they were all fine, so it’s probably a wheel sensor gone dodgy, but it’s also possible it’s a MAF issue. I need to do a code read to find out for sure.
Middle-aged Dirtbag
- NotoriousREV
- Posts: 6437
- Joined: Wed Apr 11, 2018 4:14 pm
Re: eBay 996 build thread
And now my indicator switch is broken. I have to hold it on when turning right and it won’t self-cancel when turning left. It always felt a bit dodgy. £200 for a new one. I’m looking for used ones on eBay but apparently original ones all fail but new ones don’t as they’re a new design.
Middle-aged Dirtbag
- DeskJockey
- Posts: 4828
- Joined: Thu Apr 12, 2018 8:58 am
Re: eBay 996 build thread
Probably a good indication that you should buy new, unless it there's an indication that the eBay ones are the newer design.NotoriousREV wrote: ↑Wed Oct 23, 2019 4:22 pm And now my indicator switch is broken. I have to hold it on when turning right and it won’t self-cancel when turning left. It always felt a bit dodgy. £200 for a new one. I’m looking for used ones on eBay but apparently original ones all fail but new ones don’t as they’re a new design.
---
Driving a Galaxy far far away
Driving a Galaxy far far away