Mito is being a pain, wheel bearing I changed a couple of months ago seems to have got noisy again. I put some extra grease in when I fitted it because as it was supplied it looked a bit stingy.
Can’t actually feel any play in it, but when I took the dust cap off there was a little moisture so wonder if it’s corroded inside a little somehow. Pretty disappointed as I used a febi one and have used plenty of their stuff over the years with no issue, and avoided the dirt cheap ones.
Have gone for an skf one this time…
Also decided I’d had enough of my torque wrench not ratcheting cleanly so stripped that down, cleaned out all the hard old grease and relubricated it.
Then collected a boot full of paving slabs in the x5.
Gave the merc a quick rinse as it was fairly clean, then a proper wash for the x5 which was proper disgusting filthy
Compact had its first run out since before Christmas during the week, great to be back in it.
Please please please can we have some warmer dry weather…