The Cold Start Thread.
Re: The Cold Start Thread.
Time for the M140i addition to the library of cold starts.
Re: The Cold Start Thread.
M240i poppety bang cold start.
iPhone mic cut the second pops for some reason.
iPhone mic cut the second pops for some reason.
- ShockDiamonds
- Posts: 815
- Joined: Thu Apr 12, 2018 9:23 pm
Re: The Cold Start Thread.
Yet another reason why my next car absolutely will not be bloody hybrid.
Re: The Cold Start Thread.
I shall do a no glow-plug cold start so everyone with a wanky 4 cylinder petrol can appreciate a good flattery start.
Dave!
Dave!
Re: The Cold Start Thread.
iPhone doesn't do a great job here as its quite bassy but thought I'd post this anyway
Need to sort out a proper flyby vid with the bypassed rear silencer. Watch this space.
Need to sort out a proper flyby vid with the bypassed rear silencer. Watch this space.
Re: The Cold Start Thread.
Found an instagram page of all cold starts. Lots of diesels in stupid low temps but lots of cool stuff too eg
Re: The Cold Start Thread.
155hp per litre n/a cold start and abrupt stop....I love the way the super lightweight internals make the engine stop the instant you hit the kill switch
This engine is over 20 kilos lighter than a bone stock K20.

This engine is over 20 kilos lighter than a bone stock K20.
Re: The Cold Start Thread.
Sounds smoother than I expected Dan...that yours? You not finished that yet!?
but please, not the "bone stock"
Still want to own a V10 at some point, assume that's standard exhaust @tim ? always loved the long high-pitched noise starters make on the big engines.


Still want to own a V10 at some point, assume that's standard exhaust @tim ? always loved the long high-pitched noise starters make on the big engines.
Re: The Cold Start Thread.
That was especially for you lot, I can’t stand ‘stock’ or ‘bone stock’ either 
Yes it’s mine, it’s almost finished, honest….
Smoother than a more conventional race engine would be due to the roller rockers on a Honda engine enabling cam profiles you can’t achieve on a tappet, which means extremely fast valve acceleration enabling you to reduce overlap but still achieve 15.5mm of lift. Hence it still ticks over quite smooth despite making over 330hp at 10k
Yes it’s mine, it’s almost finished, honest….
Smoother than a more conventional race engine would be due to the roller rockers on a Honda engine enabling cam profiles you can’t achieve on a tappet, which means extremely fast valve acceleration enabling you to reduce overlap but still achieve 15.5mm of lift. Hence it still ticks over quite smooth despite making over 330hp at 10k

Re: The Cold Start Thread.
Yeah full bone stock standard exhaustMatty wrote: Mon Aug 26, 2024 2:30 pm Still want to own a V10 at some point, assume that's standard exhaust @tim ? always loved the long high-pitched noise starters make on the big engines.

You settle up, I'll go get the Jag.
Re: The Cold Start Thread.
I did one for my 86 a while back with my normal talking voice at the beginning for context (using a mic with fixed audio gain)
Re: The Cold Start Thread.
Steady idle that, with what sounds like a 100g flywheeldan wrote: Mon Aug 26, 2024 1:01 pm 155hp per litre n/a cold start and abrupt stop....I love the way the super lightweight internals make the engine stop the instant you hit the kill switch![]()

Re: The Cold Start Thread.
Flywheel is just over a kilo, entire flywheel and clutch assembly is 3 kilos - its a twin plate 5.5" diameter setup which meant it needed a thousand pound starter motor with a drop down gear to reach it, as i've got a single seater flywheel setup with a starter in the standard position rather than mounted on the back of an inline gearbox like they'd usually be.
Re: The Cold Start Thread.
Have some flat four air cooled rattle, excuse the legs

- Gavster
- Posts: 3844
- Joined: Mon Jul 26, 2021 11:31 am
- Currently Driving: A washing machine with heated seats
Re: The Cold Start Thread.
Pea shooters 
