Your fleet running reports
- DeskJockey
- Posts: 4807
- Joined: Thu Apr 12, 2018 8:58 am
Re: Your fleet running reports
First outing with the four bike carrier on the back. As @V8Granite said previously how it does what it does connected to the towbar is magic.
Also got a proper run on my gravel bike and it is fantastic to ride.
Also got a proper run on my gravel bike and it is fantastic to ride.
---
Driving a Galaxy far far away
Driving a Galaxy far far away
- Sundayjumper
- Posts: 6462
- Joined: Wed Apr 11, 2018 4:04 pm
- Currently Driving: Land Rover, Peugeot 406
- DeskJockey
- Posts: 4807
- Joined: Thu Apr 12, 2018 8:58 am
Re: Your fleet running reports
Bravo.
Galaxy rolled over 123k. Not as exciting.
Galaxy rolled over 123k. Not as exciting.
---
Driving a Galaxy far far away
Driving a Galaxy far far away
Re: Your fleet running reports
Beautiful.
I looked down at the M135i dash yesterday, and saw 88889
To say I was infuriated is a huge understatement.
Re: Your fleet running reports
Does look a bit nippy in the first image,
Re: Your fleet running reports
123456.7
_____8.9
- DeskJockey
- Posts: 4807
- Joined: Thu Apr 12, 2018 8:58 am
Re: Your fleet running reports
Yes, when we get there. Another 420 odd miles yet to go.
---
Driving a Galaxy far far away
Driving a Galaxy far far away
Re: Your fleet running reports
Finally completed a multi-month mission to find a way that the little one could come out in the Lotus with me. Surprisingly little guidance on the subject (and admittedly a little procrastination at times).
So, part one was to obtain a seat narrow enough to fit inside the Tillett. This involved going to Halfords and taking a tape measure to all their age relevant child seats; only a couple were narrow enough and I didn't want to pay hundreds of quid for something that didn't work in the end. So was then watching FB marketplace for the correct seat, eventually got the one.
Next, obtain the inertia belt retention kit from Tillett (didn't know it existed, far from clear on the website, found out through a long shot enquiry to Steve Tillett, already wasted a load of money on a kit from the US that didn't fit).
Next, made a PE foam mould of the child seat to Tillett interface (it doesn't fit naturally with the shape of the seat). Fitted the inertia belt kit, and finally got it all in and her sat in it today. So big win.
Didn't have time to actually go out, but of course I am fully prepared that the most likely outcome is that she's going to hate being in it and cry instantly.
So, part one was to obtain a seat narrow enough to fit inside the Tillett. This involved going to Halfords and taking a tape measure to all their age relevant child seats; only a couple were narrow enough and I didn't want to pay hundreds of quid for something that didn't work in the end. So was then watching FB marketplace for the correct seat, eventually got the one.
Next, obtain the inertia belt retention kit from Tillett (didn't know it existed, far from clear on the website, found out through a long shot enquiry to Steve Tillett, already wasted a load of money on a kit from the US that didn't fit).
Next, made a PE foam mould of the child seat to Tillett interface (it doesn't fit naturally with the shape of the seat). Fitted the inertia belt kit, and finally got it all in and her sat in it today. So big win.
Didn't have time to actually go out, but of course I am fully prepared that the most likely outcome is that she's going to hate being in it and cry instantly.
Re: Your fleet running reports
I tried to engineer it on my e46 M3 to get 123456 on the odometer, 123.4 on the trip and 12:34 on the clock.
Unfortunately the odo ticked over to 123457 just as the trip reached 123.4! I was so close!
Re: Your fleet running reports
Good work! I'm going to have to come up with some creative solutions very shortly for my son in the back on the 911. His head is now right up against the roof and complaining its not comfortable for his back. Problem is - I want to retain the back / head protection of a child seat (back seats of a 911 obviously have no headrests) but he doesn't need the booster part as is tall enough already. Naturally the only available options are booster with no backrest rather than vice versa...duncs500 wrote: ↑Sat Feb 17, 2024 11:05 pm Finally completed a multi-month mission to find a way that the little one could come out in the Lotus with me. Surprisingly little guidance on the subject (and admittedly a little procrastination at times).
So, part one was to obtain a seat narrow enough to fit inside the Tillett. This involved going to Halfords and taking a tape measure to all their age relevant child seats; only a couple were narrow enough and I didn't want to pay hundreds of quid for something that didn't work in the end. So was then watching FB marketplace for the correct seat, eventually got the one.
Next, obtain the inertia belt retention kit from Tillett (didn't know it existed, far from clear on the website, found out through a long shot enquiry to Steve Tillett, already wasted a load of money on a kit from the US that didn't fit).
Next, made a PE foam mould of the child seat to Tillett interface (it doesn't fit naturally with the shape of the seat). Fitted the inertia belt kit, and finally got it all in and her sat in it today. So big win.
Didn't have time to actually go out, but of course I am fully prepared that the most likely outcome is that she's going to hate being in it and cry instantly.
-
- Posts: 2525
- Joined: Wed Apr 11, 2018 3:58 pm
- Currently Driving: Ferrari F430 Spider
BMW M4 Comp
Mini Cooper
LR Evoque P300e - Contact:
Re: Your fleet running reports
The back of booster seats is detachable on most of them, keep the base for the other car and try just strapping the back in the back?…GG. wrote: ↑Sun Feb 18, 2024 11:20 amGood work! I'm going to have to come up with some creative solutions very shortly for my son in the back on the 911. His head is now right up against the roof and complaining its not comfortable for his back. Problem is - I want to retain the back / head protection of a child seat (back seats of a 911 obviously have no headrests) but he doesn't need the booster part as is tall enough already. Naturally the only available options are booster with no backrest rather than vice versa...duncs500 wrote: ↑Sat Feb 17, 2024 11:05 pm Finally completed a multi-month mission to find a way that the little one could come out in the Lotus with me. Surprisingly little guidance on the subject (and admittedly a little procrastination at times).
So, part one was to obtain a seat narrow enough to fit inside the Tillett. This involved going to Halfords and taking a tape measure to all their age relevant child seats; only a couple were narrow enough and I didn't want to pay hundreds of quid for something that didn't work in the end. So was then watching FB marketplace for the correct seat, eventually got the one.
Next, obtain the inertia belt retention kit from Tillett (didn't know it existed, far from clear on the website, found out through a long shot enquiry to Steve Tillett, already wasted a load of money on a kit from the US that didn't fit).
Next, made a PE foam mould of the child seat to Tillett interface (it doesn't fit naturally with the shape of the seat). Fitted the inertia belt kit, and finally got it all in and her sat in it today. So big win.
Didn't have time to actually go out, but of course I am fully prepared that the most likely outcome is that she's going to hate being in it and cry instantly.
Failing that the Saturn V command module method will give him sufficient head room!
Cheers,
Ian
Ian
Re: Your fleet running reports
You can get those really skinny travel kids seats, but I guess they don't provide a very secure platform. How old is your son?
Re: Your fleet running reports
He's 8 next month and I think above the cut-off height wise where he could ride without a seat - but with no head support that idea doesn't thrill me.
Re: Your fleet running reports
This sort of discussion kind of sums up another one the attractions of ///M cars for me. In the end, they're just normal cars with full sized rear seats, isofix, roof bar fittings, folding seats, etc..
it does make everything straightforward, though I'd love it if I could easily fit a removable tow bar to attach a bike rack. A few people have done it, but it's a little more hassle than just a bolt on.
it does make everything straightforward, though I'd love it if I could easily fit a removable tow bar to attach a bike rack. A few people have done it, but it's a little more hassle than just a bolt on.
- integrale_evo
- Posts: 4523
- Joined: Thu Apr 12, 2018 5:58 pm
Re: Your fleet running reports
The no towbars on M cars thing is historical and a bit annoying. Understandable I guess from the e46 on where the exhaust gets in the way, but even e30 and 36 don’t come rated to tow and have exactly the same floorpan and mounts as the regular versions.
Cheers, Harry
Re: Your fleet running reports
I was also following / side by side with an e92 M3 under the Vauxhall gyratory tunnel yesterday and we both succumbed to the obvious temptation - I think your old car is probably my favourite M...Rich B wrote: ↑Sun Feb 18, 2024 5:37 pm This sort of discussion kind of sums up another one the attractions of ///M cars for me. In the end, they're just normal cars with full sized rear seats, isofix, roof bar fittings, folding seats, etc..
it does make everything straightforward, though I'd love it if I could easily fit a removable tow bar to attach a bike rack. A few people have done it, but it's a little more hassle than just a bolt on.
Re: Your fleet running reports
I probably agree. It was far better sounding than my M2 or the e46, and it was every bit as agile too despite it being larger. If it didn't drink like George Best in happy hour (av 20mpg was doing well) it would be the perfect car imo!GG. wrote: ↑Sun Feb 18, 2024 6:45 pmI was also following / side by side with an e92 M3 under the Vauxhall gyratory tunnel yesterday and we both succumbed to the obvious temptation - I think your old car is probably my favourite M...Rich B wrote: ↑Sun Feb 18, 2024 5:37 pm This sort of discussion kind of sums up another one the attractions of ///M cars for me. In the end, they're just normal cars with full sized rear seats, isofix, roof bar fittings, folding seats, etc..
it does make everything straightforward, though I'd love it if I could easily fit a removable tow bar to attach a bike rack. A few people have done it, but it's a little more hassle than just a bolt on.
Re: Your fleet running reports
Have you tried him in it without the booster or seat at all ?
The TT doesn’t need a booster seat in the back as it puts him too close to the tailgate glass. So with no booster and even though he is only 131cm Connor has a pretty perfect seatbelt height and sits securely. Maxwell was the same but a little younger.
I think a back with no base would move about too much.
Dave!
The TT doesn’t need a booster seat in the back as it puts him too close to the tailgate glass. So with no booster and even though he is only 131cm Connor has a pretty perfect seatbelt height and sits securely. Maxwell was the same but a little younger.
I think a back with no base would move about too much.
Dave!
Re: Your fleet running reports
Took the car out for a wee trip to the country tonight, thinking that driving through Bradford would be easier at 9pm on a Sunday. Nope, saw a fight break out at some traffic lights. Utter fucking shithole of a town, full of morons.
Anyway, car is quite entertaining at 6/10ths on country roads, bags of torque there in the midrange, it feels almost as quick to ride the torque as it does to stretch it out to the redline. Good laugh.
Need to find some roads on the Leeds exit side that I can play around on, methinks.
Anyway, car is quite entertaining at 6/10ths on country roads, bags of torque there in the midrange, it feels almost as quick to ride the torque as it does to stretch it out to the redline. Good laugh.
Need to find some roads on the Leeds exit side that I can play around on, methinks.