Do they do that intentionally or is it just because they need to run at quite a low pressure, which rapidly increases when the vast amount of energy is put into them on launch?
A bit of both, when they first started dropping tyre pressure they noticed the wrinkle so they started developing tyres that would wrinkle and stretch more. There are a couple of reasons, it helps keep the tyre beaded, it helps soften the initial torque delivery to manage traction and as you surmised it stops the tyre blowing off when the gases expand during warm up.
The trans brake helps with that too. It holds the gearbox between first and reverse so you can build revs. When you let it go, you’re straight into first in the middle of the power band.
Those clips don’t really show it but there are othered around where you can clearly see the shocks of the power pulses at the wheel hub smoothed out by the sidewalls so the movement at the tyre surface stays constant.
Of course they’re also designed to grow and raise the gearing as speeds increase.
ZedLeg wrote: Thu Jun 08, 2023 12:27 pm
The trans brake helps with that too. It holds the gearbox between first and reverse so you can build revs. When you let it go, you’re straight into first in the middle of the power band.
Yep - It's quite a feeling when all that pent up force is released with no "build up"