Page 1 of 4
A decent cordless drill
Posted: Tue Sep 21, 2021 12:52 pm
by JonMad
My current one is crap. No torque to it, battery doesn't last. Please help me spend money.
Main uses - wheel nuts, tough cleaning jobs with brush attachments, screwdrivering, maybe even some drilling!
I currently don't have any other cordless tools but if there's a make that uses the same batteries in a cordless trimmer, hedge trimmer or other such thing then so much the better.
Re: A decent cordless drill
Posted: Tue Sep 21, 2021 12:59 pm
by simon_g
This bundle gets you two good batteries, a charger and a pretty good drill:
https://www.screwfix.com/p/makita-dhp45 ... rill/487kg
Add:
https://www.screwfix.com/p/makita-dtd15 ... bare/498jj which is good for screws and will be OK for getting lots of smaller nuts off (I use some socket adaptors and it's good for lawnmower blades, etc)
Or:
https://www.screwfix.com/p/makita-dtw30 ... bare/145kj for getting most things undone. Or £50 or so for a chinese equivalent that takes Makita batteries.
I have the Makita strimmer and hedge trimmers and they're really good.
Re: A decent cordless drill
Posted: Tue Sep 21, 2021 1:08 pm
by dinny_g
My Tradie mates all swear by DeWalt.
This looks decent enough for your use...
https://www.screwfix.com/p/dewalt-dcz29 ... lsrc=aw.ds
Re: A decent cordless drill
Posted: Tue Sep 21, 2021 1:09 pm
by Sundayjumper
You need an impact driver for wheel nuts; not quite the same as a drill.
DeWalt here. It’s noticeable the impact driver needs a freshly charged battery to achieve *full* torque but it’ll happily do plenty of sets of wheels between charges.
Re: A decent cordless drill
Posted: Tue Sep 21, 2021 1:22 pm
by Mito Man
You need a drill and impact driver.
A regular 1/4 driver that you use for screws won’t undo wheels.
So you need a drill.
A 1/4 driver.
And a 1/2 or 3/4 impact gun.
Re: A decent cordless drill
Posted: Tue Sep 21, 2021 1:38 pm
by mik
I bought that drill earlier this year. It’s fab.
Also got the impact driver very recently as I was fed up swapping between drill and screwdriver bits - but I went for the slightly more powerful version than the one offered in that combo (which probably would have been adequate but - wot evah)
These aren’t for wheel nuts - for that you want an impact
wrench with a 1/2” square drive or 3/4” and a good chunk more weight and power. The impact drivers are the ones with a hex for screwdriver bits.
Re: A decent cordless drill
Posted: Tue Sep 21, 2021 2:33 pm
by Zonda_
I use Ryobi, loads of different tools and all use same battery.
Re: A decent cordless drill
Posted: Tue Sep 21, 2021 4:54 pm
by JonMad
And... now I'm getting drill/impact wrench recommendations on Instagram
Looking at this pairing - three tools, two x 2A batteries + charger
- Screenshot 2021-09-21 at 16.41.40.png (168.01 KiB) Viewed 1500 times
or this pairing - two tools (same impact wrench, more powerful combi drill, also brushless), two x 5A batteries + charger (+ box, not shown)
- Screenshot 2021-09-21 at 16.41.46.png (146.71 KiB) Viewed 1500 times
then maybe get
one of these later when it's on a deal
Re: A decent cordless drill
Posted: Tue Sep 21, 2021 5:10 pm
by mik
That impact wrench is the same one
@scotta bought a while back. It is
serious, but also therefore reassuringly big and heavy. And it is recommended that you don’t try to run it on a small Ah battery. 4Ah + is really needed.
FWIW I have
literally just ordered its smaller brother
https://www.ebay.co.uk/itm/323840335374 with 20% off code PURCHASE4LESS. Which seemed a pretty good deal….
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 10:10 am
by V8Granite
I have this….
https://www.powertoolworld.co.uk/makita ... -body-only
Plus a smaller 1/2” drive 180nm one.
Dave!
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 10:55 am
by Gavin
As a drill, I bought an 18v DeWalt at the recommendation of mates what use them for work. I was told go over 3Mah for battery life. I have been massively impressed, so much more powerful than the wee Makita I had and battery life is phenomenal.
I would assume their impact gun would be similarly decent.
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 11:07 am
by Sundayjumper
One word of warning - although more is obviously better, these super powerful ones will just break stuff if you’re not careful with them.
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 8:40 pm
by mik
Impact wrench arrived. Have a swithered over getting one for years so I look forward to being annoyed I didn’t do so earlier.
It’s great to have a drill now that isn’t shot too.
BUT.- these interchangeable batteries force you to appear like a fanboi. DEWALT FTW!
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 8:48 pm
by Sundayjumper
Impact wrench is brilliant for getting wheels on & off. So much faster.
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 9:12 pm
by mik
That’s nuts
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 9:38 pm
by JonMad
Yep that does look the business.
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 9:53 pm
by Simon
Sundayjumper wrote: ↑Wed Sep 22, 2021 8:48 pm
Impact wrench is brilliant for getting wheels on & off. So much faster.
Off yes. For 'On' use a torque wrench and do the job properly.
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 9:57 pm
by Sundayjumper
Simon wrote: ↑Wed Sep 22, 2021 9:53 pm
Sundayjumper wrote: ↑Wed Sep 22, 2021 8:48 pm
Impact wrench is brilliant for getting wheels on & off. So much faster.
Off yes. For 'On' use a torque wrench and do the job properly.
A quick blip (literally just a blip) with the impact wrench to spin the bolts into place then finish off with a torque wrench.
Re: A decent cordless drill
Posted: Wed Sep 22, 2021 9:59 pm
by Mito Man
Nah, slap a torque stick on that fucker and mash the trigger until sparks come out.
Re: A decent cordless drill
Posted: Fri Sep 24, 2021 8:57 am
by integrale_evo
If you’re buying into a battery system, an angle grinder and recip saw are wonderful things to have. I barely ever bother using my mains powered tools these days.