But what are you doing with the roof? And in fact, what has anyone else done with their roof and how long did it last? Hmm?Rich B wrote: ↑Wed Aug 08, 2018 12:52 pmi moved! I have big plans for a mega-shed in the current place. I have an 8mx8m area at the end of the garden earmarked for something epic evenumtually.speedingfine wrote: ↑Wed Aug 08, 2018 12:47 pmWhat happened to it, you didn't build it long ago IIRC?
Shed thread
-
- Posts: 2179
- Joined: Thu Apr 12, 2018 1:05 pm
Re: Shed thread
-
- Posts: 2179
- Joined: Thu Apr 12, 2018 1:05 pm
Re: Shed thread
32/1000 box profile is the answer according to a PH thread. Should I trust them though
Re: Shed thread
I've got a mid-grade felt on mine. They get torn and other damage by branches dropping on them. I just replace it every few years.
Re: Shed thread
It’s done after close to a year
Will do a bit of a write up about it.
This was the ground, it needed to be widened quite a bit as there’s a steep hill just to the left
Making a big enough area took months as I was weak as shit. What you may see is that I drilled many of the boulders and split them manually with wedges to get into more moveable chunks.
Finally starting the actual build
Ground here is chalk with flint which binds up the auger and is a right bastard to get through. Seems like nothing is easy here.
As spring moves into summer we get some progress
The walls sit on hardwood decking, the floor is just ply so that it’s replaceable.
At this point my dad wanted a split level to aid roof construction and for storage but he wanted it to not look like an afterthought. As if the build wasn’t difficult enough.
Sorry Greta
2 broken backs later and it’s in place.
The building has close to 50 windows, probably took me a month of cutting frames and polycarbonate and all the trim that accompanies it
I don’t have any pics of the roofing process as it was just a tedious job of lifting OSB sheets
Put underlay and a metal roof
The buildings almost done at this point but we have 200 metres of fencing to do with a fence post every 2 metres and 3 gates
Used the rest of the tree for the main gate
Kudos to the Mule for moving every bit of material up there. By the end of it my back was as fecked as it’s suspension though
Electrics finally connected
Onto yesterday for the hay run
And the new residents
Phew.
How about not having a sig at all?
- IanF
- Posts: 2414
- Joined: Wed Apr 11, 2018 3:58 pm
- Currently Driving: Ferrari F430 Spider
BMW M4 Comp
Mini Cooper
LR Evoque P300e - Contact:
Re: Shed thread
Looks good Mito.. now just admit you took pics whilst the labourers were on tea break!
Cheers,
Ian
Ian
Re: Shed thread
You can see the seasons change in the pictures! To be fair it wasn’t too bad considering we worked on it every other weekend bar the odd week!
How about not having a sig at all?
Re: Shed thread
That’s an impressive shed and some very nice goats
Dave!
Dave!
Re: Shed thread
I’d love to do something like that with my dad...
Alas, we’d have killed each by the first tea break...
Alas, we’d have killed each by the first tea break...
Re: Shed thread
That's a cracking shed build! Handsome goats too.
Quick question for the experts.... What's the best way to insulate these things if you're planning a conversion in to an office of some sort? Looks like the frame has had standard rolls of insulation "wool" put in and then just normal plasterboard over the top. Which is f*cking baltic, but its a decent sized space so I'm keen to make more use of it next year as there's power in to it as well.
Quick question for the experts.... What's the best way to insulate these things if you're planning a conversion in to an office of some sort? Looks like the frame has had standard rolls of insulation "wool" put in and then just normal plasterboard over the top. Which is f*cking baltic, but its a decent sized space so I'm keen to make more use of it next year as there's power in to it as well.
Cheers,
Mike.
Mike.
Re: Shed thread
Once the solicitors have done their thing we should be into a new home in Jan and I have a very nice space to build a big shed/office so that will be my little project for 2020 (along with all the other stuff my wife tasks me with).Ascender wrote: ↑Mon Dec 16, 2019 1:55 pm That's a cracking shed build! Handsome goats too.
Quick question for the experts.... What's the best way to insulate these things if you're planning a conversion in to an office of some sort? Looks like the frame has had standard rolls of insulation "wool" put in and then just normal plasterboard over the top. Which is f*cking baltic, but its a decent sized space so I'm keen to make more use of it next year as there's power in to it as well.
Re: Shed thread
Excellent work Mito (and dad). I now feel even more ashamed that I've still done nothing about ours since the felt blew off the roof weeks ago...
- integrale_evo
- Posts: 4494
- Joined: Thu Apr 12, 2018 5:58 pm
Re: Shed thread
I don't know about the best way, when I did my wooden frame garage I used a breathable waterproof membrane on the outside of the studs, then clad with featherboard. Filled the inside of the studs with normal rock wool type insulation, then used a metallic bubble wrap insulation on the inside facing side of the studs, covered with 18mm chipboard 'tiles' which are designed for loft flooring but worked out good value, and I could transport them easily in the car.Ascender wrote: ↑Mon Dec 16, 2019 1:55 pm That's a cracking shed build! Handsome goats too.
Quick question for the experts.... What's the best way to insulate these things if you're planning a conversion in to an office of some sort? Looks like the frame has had standard rolls of insulation "wool" put in and then just normal plasterboard over the top. Which is f*cking baltic, but its a decent sized space so I'm keen to make more use of it next year as there's power in to it as well.
Seems to have done the job.
I looked at the rigid insulated panels but they seemed silly expensive, but then I wasn't trying to keep it as warm as indoors.
Cheers, Harry
Re: Shed thread
Thanks for that, will look in to it more. Ironically Mrs Mike bought some of that metallic bubble wrap for use in the garage but never got round to using it. I think it will be a case of ripping off the plasterboard, putting the bubble wrap up and then something else on top - maybe those chipboard tiles.integrale_evo wrote: ↑Mon Dec 16, 2019 3:01 pmI don't know about the best way, when I did my wooden frame garage I used a breathable waterproof membrane on the outside of the studs, then clad with featherboard. Filled the inside of the studs with normal rock wool type insulation, then used a metallic bubble wrap insulation on the inside facing side of the studs, covered with 18mm chipboard 'tiles' which are designed for loft flooring but worked out good value, and I could transport them easily in the car.Ascender wrote: ↑Mon Dec 16, 2019 1:55 pm That's a cracking shed build! Handsome goats too.
Quick question for the experts.... What's the best way to insulate these things if you're planning a conversion in to an office of some sort? Looks like the frame has had standard rolls of insulation "wool" put in and then just normal plasterboard over the top. Which is f*cking baltic, but its a decent sized space so I'm keen to make more use of it next year as there's power in to it as well.
Seems to have done the job.
I looked at the rigid insulated panels but they seemed silly expensive, but then I wasn't trying to keep it as warm as indoors.
Cheers,
Mike.
Mike.
Re: Shed thread
Cheers, the goats were destined for slaughter but now we have a big space we can accept a lot more in so whenever the smallholder has a goat she doesn’t want we will adopt it. They’ll also do a good job of clearing the 30 degree bank filled with brambles.
How about not having a sig at all?
Re: Shed thread
Great work Mito and the goats are
Re: Shed thread
Added a canopy a month ago, the recent warm weather means the goats are now using it as they’re not very heat tolerant and more geared for cold weather.
Started building another shed but I need to organise my pictures for it.
Started building another shed but I need to organise my pictures for it.
How about not having a sig at all?
Re: Shed thread
I would love to be building my planned shed and have loads of wood kicking about but need a concrete base and power so am kind a stuffed. Ideally big enough to have the bikes in and a usable space for buggering about with resin and scroll saw and what not.
Re: Shed thread
Started another build although it goes back 2 years what with the planning.
The base was poured last year and then we built the goat shed so just left it.
Once we realised lockdown was a likely possibility my dad ordered a sawmill so we could try and make some bits of it ourselves.
After much spannering it worked
On Wednesday we could start to put up some walls as we had a timber delivery
All walls done by Friday
We also acquired a shop supervisor but he’s a right cock and gets in the way all the time
That’s about as far as it’s got, need to mill more logs for the top section and can then start the roof. Unsure about the cladding, if we just order some in or make our own.
The base was poured last year and then we built the goat shed so just left it.
Once we realised lockdown was a likely possibility my dad ordered a sawmill so we could try and make some bits of it ourselves.
After much spannering it worked
On Wednesday we could start to put up some walls as we had a timber delivery
All walls done by Friday
We also acquired a shop supervisor but he’s a right cock and gets in the way all the time
That’s about as far as it’s got, need to mill more logs for the top section and can then start the roof. Unsure about the cladding, if we just order some in or make our own.
How about not having a sig at all?
Re: Shed thread
Interested to see this. At some point in the not-too-distant I hope to build a shed approx 6m x 4m. Would rather build something sturdy myself (with sprogs) than pay someone, or go for a shipping container instead....