The Scimitar GT Thread

User avatar
mik
Posts: 11634
Joined: Wed Apr 11, 2018 6:15 pm

Re: The Scimitar GT Thread

Post by mik »

I didn’t even open this Fred as I am happy to admit I thought this was the only Scimitar.

Image

Looks nice - in a classic way.
User avatar
Sundayjumper
Posts: 6172
Joined: Wed Apr 11, 2018 4:04 pm
Currently Driving: Peugeot 406

Re: The Scimitar GT Thread

Post by Sundayjumper »

Beany wrote: Wed Nov 18, 2020 3:24 pm I'm just jealous that I need wet leaves to start a one tyre fire :(

Fat rubber = no fun ;)
Keep an eye on ebay for some spacesavers and stick a pair of those on the back. I think they're 125 width, you'll have no problems 8-)
User avatar
Jobbo
Posts: 9175
Joined: Wed Apr 11, 2018 4:20 pm
Currently Driving: S6 Avant, Jimny, Macan, Mini

Re: The Scimitar GT Thread

Post by Jobbo »

I have to admit that, while I was aware of the SE4 Scimitars I always thought the SE5 was basically the same thing with an shooting brake rear end. But the body appears entirely different, and Wikipedia suggests the chassis isn't even the same. Always loved the SE5 shape; my grandmother had a lady friend who had moved over to Majorca for most of the year but kept a house here and a 1973 SE5 in turquoise as her UK car. She always had an amazing tan. So SJ, make sure you get down to the spray-tan shop.
User avatar
Beany
Posts: 6270
Joined: Wed Apr 11, 2018 5:27 pm

Re: The Scimitar GT Thread

Post by Beany »

Sundayjumper wrote: Thu Nov 19, 2020 9:38 am
Beany wrote: Wed Nov 18, 2020 3:24 pm I'm just jealous that I need wet leaves to start a one tyre fire :(

Fat rubber = no fun ;)
Keep an eye on ebay for some spacesavers and stick a pair of those on the back. I think they're 125 width, you'll have no problems 8-)
Might be a bit too far the other way, that.

Much like my tankslappers :)
User avatar
Sundayjumper
Posts: 6172
Joined: Wed Apr 11, 2018 4:04 pm
Currently Driving: Peugeot 406

Re: The Scimitar GT Thread

Post by Sundayjumper »

I've joined the Scimitar owners forum and received a warm welcome. I get the feeling there's a lot of beards. But that's OK for this kind of car, you don't run a 50-ish year old car if you're scared of getting your hands dirty so there's loads of technical knowledge on there.

My car was known to exist but hadn't been active in the club recently. Someone dug out a couple of photos of it at Curborough in 2010. Looks like it's not changed at all.


Image


Image
User avatar
Rich B
Posts: 9536
Joined: Wed Apr 11, 2018 4:22 pm
Currently Driving: M2 Competition

Re: The Scimitar GT Thread

Post by Rich B »

It looks too modern for those wheels even though it isn't!
User avatar
jamcg
Posts: 3805
Joined: Wed Apr 11, 2018 5:41 pm

Re: The Scimitar GT Thread

Post by jamcg »

Reminds me of the volvo p1800, which is no bad thing
User avatar
Sundayjumper
Posts: 6172
Joined: Wed Apr 11, 2018 4:04 pm
Currently Driving: Peugeot 406

Re: The Scimitar GT Thread

Post by Sundayjumper »

Rich B wrote: Thu Nov 19, 2020 3:00 pm It looks too modern for those wheels even though it isn't!
I'm torn on the wheels. I do like the steels for the originality, but I also like minilites (or similar), like so:


Image


But not fussed about wire wheels. A bit too fiddly.

Image
User avatar
Rich B
Posts: 9536
Joined: Wed Apr 11, 2018 4:22 pm
Currently Driving: M2 Competition

Re: The Scimitar GT Thread

Post by Rich B »

I'm not a huge fan of wire wheels either, but I do like it on silver wheels.
User avatar
Sundayjumper
Posts: 6172
Joined: Wed Apr 11, 2018 4:04 pm
Currently Driving: Peugeot 406

Re: The Scimitar GT Thread

Post by Sundayjumper »

Back home from a 300 mile round trip. I think I've done OK. The car came with a stack or receipts & a CD of photos of the restoration in 2009. The photos add a lot of provenance to this kind of car. There's also a sticker on the door jamb from JLR - it was in the museum at Gaydon ??

86AE90B0-99AD-496F-9AD4-1F71845A76A4.jpeg
86AE90B0-99AD-496F-9AD4-1F71845A76A4.jpeg (139.71 KiB) Viewed 1105 times
88A2AA91-1AD7-4821-B965-06494A69D47B.jpeg
88A2AA91-1AD7-4821-B965-06494A69D47B.jpeg (56.94 KiB) Viewed 1106 times
User avatar
DeskJockey
Posts: 4635
Joined: Thu Apr 12, 2018 8:58 am

Re: The Scimitar GT Thread

Post by DeskJockey »

Excellent.

Is the roof line of the Scimitar on the trailer below the Touareg's?
---
Driving a Galaxy far far away
User avatar
jamcg
Posts: 3805
Joined: Wed Apr 11, 2018 5:41 pm

Re: The Scimitar GT Thread

Post by jamcg »

Nice bit of provenance that sticker. Hope you have a great time with it
User avatar
GG.
Posts: 4607
Joined: Wed Apr 11, 2018 4:16 pm

Re: The Scimitar GT Thread

Post by GG. »

Sundayjumper wrote: Sat Nov 21, 2020 3:44 pm Back home from a 300 mile round trip. I think I've done OK. The car came with a stack or receipts & a CD of photos of the restoration in 2009. The photos add a lot of provenance to this kind of car. There's also a sticker on the door jamb from JLR - it was in the museum at Gaydon ??


86AE90B0-99AD-496F-9AD4-1F71845A76A4.jpeg


88A2AA91-1AD7-4821-B965-06494A69D47B.jpeg
Interesting sticker - wonder if it was required as collateral for JLR borrowings. Credit agreements on moveable chattels or equipment sometime require a ‘plaque’ to put third parties on notice...
User avatar
Sundayjumper
Posts: 6172
Joined: Wed Apr 11, 2018 4:04 pm
Currently Driving: Peugeot 406

Re: The Scimitar GT Thread

Post by Sundayjumper »

I've managed to do a small amount of fettling over the weekend. In no particular order:

Leaving it to idle on the drive for a while, it spluttered and cut out. It had run out of fuel. Now, being an old car, it has a mechanical fuel pump, and if the engine is not running at a decent speed (like when you're trying to start it....) it won't pump enough fuel to prime the carb. I had to resort to pouring fuel straight into the top of the carb, firing it up, it dies after a second, more fuel, fire it up, etc. about half a dozen times before it would run properly. Note to self - do not let it run dry again !

Also it turns out it has huge fuel tank, 21¼ gallons, just over 96 litres ! That's standard, it's not been modified.

The handbook is good. It includes torque settings for the head bolts. You don't get that in the handbook for a modern car ! The first thing on the "every 1000 miles" checklist is "top up engine oil". Not check engine oil, top up engine oil.

The rear brakes were seized 'on' as if the handbrake was permanently on. I went into that all geared up for a fight. If a drum brake mechanism is seized it can be an utter b*******stard getting the drum off. But I simply loosened the adjuster a few turns and all was well ! Everything inside seems in good order so it's a bit odd that it was stuck.

I drove it properly for the first time today - all the way to Tesco to buy fuel. The brakes aren't great and seem to grab a bit, and the clutch judders when pulling away, this is all hopefully due to lack of use. On the way back I got up to an amazing 55mph, and tried out the overdrive for the first time, which seems to be working perfectly. So that's another bit of good news. The gear change is atrocious though. I'll need to do something about that. I'm sure the gearbox is fine, it's just a very very worn linkage.

But underneath it all, it feels like it should be quite nice to drive. One day.
User avatar
Sundayjumper
Posts: 6172
Joined: Wed Apr 11, 2018 4:04 pm
Currently Driving: Peugeot 406

Re: The Scimitar GT Thread

Post by Sundayjumper »

Nice easy job completed today, exhaust trims. The tail pipes were plain stainless steel, with a 45 degree slash cut, but neither of them straight ! The o/s one very noticeably. And not just a matter of rotating the exhaust.

So I ordered a pair of slip-on trims, cut the pipes back slightly and have just put them on. Much smarter.

exhaust1.jpeg
exhaust1.jpeg (142.37 KiB) Viewed 986 times
exhaust2.jpeg
exhaust2.jpeg (120.89 KiB) Viewed 986 times
exhaust3.jpeg
exhaust3.jpeg (86.41 KiB) Viewed 986 times
User avatar
jamcg
Posts: 3805
Joined: Wed Apr 11, 2018 5:41 pm

Re: The Scimitar GT Thread

Post by jamcg »

Looks tidy, what secures them on?
User avatar
Sundayjumper
Posts: 6172
Joined: Wed Apr 11, 2018 4:04 pm
Currently Driving: Peugeot 406

Re: The Scimitar GT Thread

Post by Sundayjumper »

Faith :D

Just kidding. They're a snug fit over the tailpipe, and there's a grub screw underneath to clamp it on. I might even drill a hole and stick a pop rivet in to be make sure it stays in place.
Post Reply