Repairing a Rusty Stone Chip

[Swervin_Mervin]

Got a few stone chips on the 330 that I was finally going to tackle. Got wet and dry, got a BMW touch up pen with laquer. Some of the ships, however, are slightly rusty - nothing major, no bubbling etc. Given it's all galvanised will I be ok to sand back and touch up, or should I really be applying something like KuRust first?

[NotoriousREV]

I’d definitely apply some KuRust or whatever, personally.

[integrale_evo]

I'd scrape out as much as you can with sandpaper or one of those little fibreglass picks, then kurust or similar, prime, paint etc. Should be fine for a good few years.

[Swervin_Mervin]

Ta. Kurust pen ordered.